News

HOME / NEWS / Industry News / Talk about the correct use of eps cutting machine
EPS cutting machines are widely used in our construction industry, so what should you pay attention to when using EPS cutting machines?
(1) Before the cutting machine stops, do not release your hand from the operating handle.
(2) Before use, the performance of EPS line equipment must be carefully checked to ensure the integrity of each component. The power switch, the tightness of the cutting piece, the protective cover or safety baffle must be checked in detail, and the operating table must be stable. Turn on the main switch first, make a few laps with no load, and allow it to start after confirming that it is safe and correct.
(3) Before operation, you must check whether the power supply is consistent with the rated voltage of the equipment, so as to avoid wrong connection of the power supply, and do not use saw blades with a rated speed lower than 4800 rpm.
(4) In order to improve work efficiency, before sawing a single or multiple branches together, be sure to do a good job of auxiliary clamping and positioning.
(5) The EPS line cutting machine must be held steady, the handle of the cutting machine must be held evenly, and the cutting machine must be cut vertically, and the fixed end must be firm and reliable.
(6) Do not attempt to saw small workpieces that are not clamped or profiles with serious edges. (For example, when the outer diameter is less than 15 cm).
(7) No one is allowed to stand on the front and side of the cutting machine during cutting. When power failure, rest or leave the work place, the power supply should be cut off immediately; no strong cutting operation should be performed, and the motor speed should reach full speed before cutting. Do cutting work.
(8) There should be sufficient lighting brightness when working at night.
Warm reminder: Correct use of eps cutting machine can prolong the service life of the cutting machine and protect your own life safety.

Contact Us

*We respect your confidentiality and all information are protected.