News

HOME / NEWS / Company News / Introduce the inspection of EPS cutting machine
When using an EPS cutting machine, regular inspections are required, so where should we start?
1. It is necessary to check whether there is garbage at some air inlets, and whether the surface of the valve is in a normal state. These are the most basic prerequisites.
In the process of using every day, we need to do a good job of checking to ensure that there is no problem with the device, and then use it. Once there are some aspects of the situation, it cannot be applied, and it must be done in time. Adjustment.
2. Also check if some screws are loose. Use a vacuum cleaner or a hair dryer to directly clean up some dust in the cabinet, so as to ensure better application in the future.
On various switches and buttons, if there are some problems, they must be replaced in time, otherwise it will affect the next use, so everyone must pay attention to it with respect.
Usually do a good job of inspection to see some of its own specific conditions and whether there are other problems. If you do the work in these areas correctly, and do the whole inspection more in place, then you can ensure the work is more smooth in the process of using it.
Every staff member who uses the equipment should develop good habits and be able to do some specific inspections.
It is very important for the EPS cutting machine to be inspected regularly, so that it can be checked out when the machine has not yet failed, and will not cause work delays.

Contact Us

*We respect your confidentiality and all information are protected.